Back to 1 Dimmer
Specs, wiring & warranty — 1 Dimmer
Technical specifications
| Colours | Black, White, Blue & Grey |
|---|---|
| Power Source | AC 240V 50Hz |
| Module | 2 (1 Dimmable Light) |
| Max Load | Dimmable LED Max.100W |
| Self-Consumption | ~1.6W |
| Wireless Standard | IEEE 802.11 b/g/n |
| Operating Temp | -10°C to +55°C |
| Dimension | 88mm x 88mm x 43mm |
| Enclosure Material | ABS (FR Grade) |
| Net Weight | 0.19kg |
| Remote control distance | 25 ft |
Wiring drawing
| Terminal | Meaning |
|---|---|
| N | Neutral |
| P1 | Phase 1 UPS/EB |
| P2 | Phase 2 EB |
| D | Dimmer 1 UPS/EB |
- Type 1: Single Power Source (EB or UPS and Common Neutral): The phases for EB and UPS will remain separate. The neutral line will be common for both EB and UPS. In the above scenario, the phase and neutral connections will be as follows: The UPS or EB phase is connected to P2, providing power to the device. The UPS or EB phase is also connected to P1 (looped from P2), providing power to the load (D). The common neutral will be connected to N.
In the box
- Touch Switch 1D × 1
- Remote × 1
- Console Screws × 2
- Instruction Manual × 1
Warranty
3 years
- Iotics Technology Private Limited undertakes to replace or repair, at its discretion, products should they become defective solely as a result of any manufacturing defects for a period of 3 years from the date of purchase.
- The guarantee will be valid only if installation procedures / maintenance are carried out by a qualified professional electrician and the product has been used in a specific way and for the specified purposes as mentioned in the user's manual.
- Loss or damages resulting from unauthorized adaptations/adjustments/tampering/improper installation of the product are not covered.
- Accidental/Physical/water damage and damage due to high voltage burnouts are out of the purview.
- The manufacturer takes no direct, indirect or any type of consequential liability of whatsoever nature under any condition, of customer's appliances functioning or malfunctioning of his/her appliance by or after buying the product.
- The guarantee does not extend to cover consequential loss, damage or installation costs arising from the defective product.
Safety
- Do not install the device without turning OFF the main power supply.
- Do not connect the glass panel without turning OFF the main power supply.
- Dimmable Light switch is capable of supporting a maximum of 200W resistive load or a maximum of 100W Dimmable Light / Inductive load only.
- Take extra precaution while connecting phase and neutral wires to the device and the load.
- Do not connect loads in series or in parallel to one 6A light switch. Only connect single light or single fan loads to each 6A switch.
- Only a single load (6A) with a maximum of 40W is supported in cases of LED & CFL fittings. Anything more may weld the switch contacts and leave the load in a permanently ON state.
- 12V and 24V power supply-based LED light strips are NOT supported in 6A light switches. 240V Mains Voltage LED Strip Lights are supported in 6A light switches.
- TRIAC - 16 Amps - Ind.100W